- Artikelnr.: 1012986
- Hersteller-Nr.: EN58089
- EAN: 4713105958089
- Gewicht: 7,7 kg
5 im externen Lager verfügbar
inkl. MwSt. zzgl. Versandkosten
The aluminum pipe comes in three available lengths (50mm, 150mm and 200mm). The aluminum pipes together make up the major framework of your creation. Make sure you plan ahead before you started the assembly. Once you have become more experienced with Dream Box parts, you can trim the aluminum pipes to certain length for your particular creation.
The metal beam comes in two available lengths (245mm and 395mm) and they allow you to bridge two parts together with the combination of c-rings. Metal beams are vital parts for mounting motherboards, optical drives, and hard drives (if you intend to build a PC) or simply use them as a supporting beam.
You can mount a power supply unit to your creation (if you intend to build a PC) simply by fastening this bracket to your PSU in combination with c-rings.
This right-angled bracket acts as an extension or a bridge for joining two parts/components. In our example, we used it to fasten one side with a c-ring and the other side for securing a graphic card so that the card will not be hanging free in the air.
This I/O unit provides the ON/OFF and reset buttons, MIC & headphone jacks, two USB 2.0 and two USB 3.0 connections. This unit can be mounted to an aluminum pipe with two c-rings.
This is one of the most critical part in Dream Box package. C-rings make mounting of parts/accessories to your creation possible. C-rings also let you link up two completely different units together in one structure.
This joint allows you to connect with aluminum pipes in four directions.
This joint allows you to connect with aluminum pipes in three directions.
2-WAY 90° JOINT
This joint allows you to connect with aluminum pipes in two directions at 90∘ angle.
2-WAY 135° JOINT
This joint allows you to connect with aluminum pipes in two directions at 135∘ angle.
2-WAY 180° JOINT
This joint allows you to connect with aluminum pipes in two directions at 180∘ angle.
You can use this cap to close off the un-used part of a joint. It can also become a foot of a structure.