|
10mm barb fitting made from nickel-coated brass for PVC, PU, PA, silicone or PE hoses with an inner diameter of 11-13 mm. G3/8" outer thread. Inner diameter of connector: 8,4mm Note for watercooling beginners:The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview: 10mm (3/8") hose clamp: up to 8mm none, from 10mm up required 10mm (7/16") hose clamp: up to 8mm none, from 10mm up required 12mm (1/2") hose clamp: up to 11mm none, from 12mm up required 13mm (1/2") hose clamp: up to 11mm none, from 13mm up required Cet article sera livré, sauf indication contraire, sans un manuel imprimé. Pour toute question concernant l'installation du produit, s'il vous plaît contacter notre support. Choose your style  10mm (3/8") Embout Métal Cannelé 3/8" avec Joint Torique 0,99 €*instead of 1,79 €* only 0,99 €*  10mm (3/8") Embout Métal Cannelé 3/8" avec Joint Torique - Noir Nickel 1,29 €*instead of 2,09 €* only 1,29 €* |
|
