|
13mm barb fitting made from nickel coated brass for PVC, PU, PA, silicone or PE hoses with an inner diameter of 11-13mm. G1/2" outer thread. The hose has to be fixated with a hose clamp or zip tie. Inner diameter of connector: 7,8mm. Note for watercooling beginners: The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview: 10mm (3/8") hose clamp: up to 8mm none, from 10mm up required 10mm (7/16") hose clamp: up to 8mm none, from 10mm up required 12mm (1/2") hose clamp: up to 11mm none, from 12mm up required 13mm (1/2") hose clamp: up to 11mm none, from 13mm up required Cet article sera livré, sauf indication contraire, sans un manuel imprimé. Pour toute question concernant l'installation du produit, s'il vous plaît contacter notre support. |
|
