10mm freely revolvable 90° angled barbed fitting made from black nickel coated brass with or-ring for PVC, PU, PA, PE or silicone hoses with an inner diameter of 10mm. G1/4" outer thread.

Technical details:
Height: 32mm
Width incl thread: 36mm
Thread size: G1/4"

The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.

10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required