Recommended accessories

Alphacool Heatmaster - The ultimate fan and pump controller with temperature monitoring,

Measure, control, regulate - completely independent of your PC (After configuration via the Windows software is completed the CPU and RAM requirements are not needed any more)

Don't worry about the cooling of your precious PC any more - once configured the Heatmaster® automatically adjusts the cooling to the current situation and your requirements.
The Heatmaster® can also protect your system from damage due to overheating, Fan-, pump-, or flow-failure (kinked hose). Three different alarm levels consisting of optical and acoustical alarms (Speaker, 2-Pin, not included) warn you if there is something wrong with the system;

- Alarms and switches all fans and pumps to 100% power (step 1)
- The second alarm level signalizes the Mainboard BIOS a fan failure in order to enable it to take further protective measures (step 2)
- The third alarm signalizes the imminent full shut-down of the PC system to prevent damage to the hardware (step 3)

These functions can be configured freely, the Heatmaster's® relay also allows switching of further components in case of an alarm.

As soon as the Heatmaster is completely configured, it monitors and controls your fan speeds, pumps and temperatures completely autonomously. No software is required, neither is an USB cable. Therefore no driver is active or required, no computer resources are used from CPU or RAM and no loss of performance when gaming, An external use for other cooling projects is therefore also possible.

The Heatmaster® also allows monitoring and logging of the system temperatures as well as several adjustments to the sensors (setting of different resistance etc.) for maximum precision.

The software used to configure the Heatmaster® is simple yet powerful. Its interface allows the necessary steps for set-up of a control circuit via Drag&Drop: Simply drag the desired components into one of the five control circuits and configure them by entering the desired values and choosing of features. The current changes can also be viewed in the monitoring window. The software is also already compatible with the current RC of Windows 7®.

Feature overview:

• Independent of PC software when configured

• No required PC resources when configured - completely autonomous operation (no USB connection required)

• Three alarm levels for maximal safety

• Logging function for fan and temperature channels

• Up to 24 Watts per fan-/pump channel

• Hysteresis function

• 5 NTC temperature sensors can be connected, additional On-Board sensor on the Heatmaster®

• Precise sensor calibration possible

• Software and Firmware updates are quick and easy

• Quick installation everywhere with Velcro strips

The Heatmaster software and the manual is avaiable for download here.

System requirements (for configuration and/or monitoring via software):
PC Intel Pentium ® III 1 GHz* / AMD Athlon ® 1 GHz*, 512 MB RAM*, 20 MB free HDD space, USB 2.0
Operating system:
Microsoft Windows XP ® SP2 or higher, Windows Vista® 32/64 Bit SP1 or higher

Made in Germany

Declarations of conformity
CE declaration of conformity:
The product was developed and tested according to the harmonized European regulations EN 55014-1 and EN 61000-6-3. The product conforms with the requirements by the EG regulation 2004/108/EG about electromagnetic compliance and therefore bears the CE label.
RoHS
All components of the Heatmaster® hardware are RoHS compatible
WEEE / ElektroG

Extent of delivery:
3x Temperature sensor 2pin
1x Extension cable 12V/3Pin/male to 12V/3Pin/socket (fan cable extension 60cm)
1x Mainboard connection cable rpm lead
1x USB 2.0 connection cable plug B to pole connector 40cm
1x Emergency shut-down cable 2-Pin socket to 2-Pin socket
1x Velcro tape 107x85 mm self-adhesive on both sides

This product has been tested for you:
Moddingbase
Overclockingstation
Effizienzgurus
Aquainfos
Freeocen
PCGH (Userreview)
Hardwaremax
Hardware-Academy
Xtremehardware (IT)
Itrend (DK)
xpert-oc-team

Many thanks to Moddingbase for providing this video: