The Innovatek i7 CPU waterblock was especially developed for the Intel socket 1366 and is optimized for the corresponding CPUS and socket system. The massive full-metal waterblock is tightly secured to the Mainboard by an installation socket.
Thanks to the inner design which is based on the G-Flow and was furthermore improved and optimized for Corei7 CPUs the cooling performance has improved massively and marks the peak of current waterblock design.
The massive waterblock weighs almost 700g and is 10x10cm large!

The i7 was, as all Innovatek waterblocks, designed for optimal usage of the cooling medium (cooling water). Even at low flow rates it already provides maximum cooling performance. It also is almost no obstruction to the flow of coolant, making it perfect for High-Flow systems.
The Innovatek i7 therefore does not have high cooling loop requirements. Flow rates can consistently be sustained as the waterblock cannot clog under normal usage conditions.

The extremely large copper core of the i7 waterblock was specially designed fr Socket 1366 CPUs and therefore enters new dimensions of cooling performance. the massive core is inseparably connected to the all-metal casing of the block and has a perfectly plane and polished surface. It therefore allows perfect contact to the CPU to most efficiently dissipate heat from the Core.
Build quality and performance of the i7 waterblock stand up to the highest standards and the design sets new standards as well.

Of course even the invisible cooling plate which sits on the CPU is perfectly plane and polished and made of pure copper to ensure perfect contact to the CPU.

Features:
Highest cooling performance
Full-metal design (made purely from metal!)
Optimized for Core i7 CPUs
No channel necks - No clogging of the waterblock!
Cooling performance sustained permanently
Full cooling performance even at minimum flow rates of only 0,3l/min
No special pump required!
Easy and simple application
Beautiful all-metal design
Thread size: G1/4"
Incl. Mounting system and backplate for Intel Socket 1366 (Core i7)

Extent of delivery:
Fully mounted waterblock
Thermal compound (Silmore)
2 fittings (straight - with soft seal) suitable for 10/8mm hoses

Note:  Please use only distilled water in combination with Innovatek protect IP / PRO as coolant! Prevent the waterblock from having any contact with Methanol or Ethanol! This could permanently damage the waterblock!

Hinweis zum Verwenden des Kühlmittels:
Entgegen der Ansicht von Aquatuning, dass der Kunde bei dem Kühlmittel die freie Auswahl hat, vertritt Innovatek die Ansicht, dass Innovatek-Produkte nur mit Innovatek-Kühlmitteln betrieben werden dürfen. Innovatek untersucht reklamierte Produkte hinsichtlich des Kühlmittels und lehnt Reklamationen grundsätzlich ab, bei denen ein anderes Kühlmittel verwendet wurde.
Kunden die Produkte aus dem Hause Innovatek in ihrem Kühlkreislauf verwenden und nicht mit Innovatek-Protect kühlen, verlieren Grundsätzlich ihre Garantie- und Gewährleistungsansprüche auf ihre erstandenen Innovatekartikel!