With this high flow kit it is possibly to significantly improve flow on the aquaduct and also to comfortably adjust. This kit contains, besides the powerful Laing DDC pump 12V DDC-1T/Plus (Swiftech MCP 355) and the amplifier module poweramp also 5m of thicker 13/10mm PVC hose to optimize flow. All required adaptor cables are included with the kit as well as two compression fittings each in 13/10mm size with G1/4" and G1/8" threads.

The pump included in this kit is to be integrated into the loop inside of the PC and will run in addition to the pump in the aquaduct. Negative effects by the simultaneous operation are not caused as both pumps are rotary pumps.

The pump in this kit can be connected via the poweramp module to the aquaduct 360 XT mk II and III as well as to the aquaduct 720XT via the external fan socket of the auqaduct PC module-
This allows stepless setting of the pump speed directly via the aquaduct or the aquasuite software. The pump can hence be regulated in power or even switched off completely as desired. In this configuration it is also possible to regulate the pump according to the temperature.
On all other aquqaduct versions the pump can be connected via the poweramp module to a free fan channel of e.g. the Mainboard or fan controller to allow adjustment of the pump's speed.

Extent of delivery:
1 x Laing DDC-pump 12V DDC-1T/Plus
1 x poweramp amplifier module
1 x Connection cable for Laing DDC pumps
2 x Compression fitting 13/10mm G 1/4 with O-Ring
2 x Compression fitting 13/10mm G 1/8 with O-Ring
5 x PVC hose 10x1,5 mm (13/10 mm)

Please note:
Due to the higher flow the aquaduct should be filled completely to avoid possible noises during operation. We recommend the Plexi top with filling opening  which will break the flow to avoid noises during operation.

In addition to this kit possibly further 13/10mm fittings are required, please order separately if needed. An aquaduct is not included!